BEARING TYPE

Bearing data - S
The internal clearance of a single angular contact spherical plain bearing is only obtained after mounting and depends on the adjustment against a second
Contact us
Bearing accessories - S
Seals and bearing housings are covered in their own sections. The accessories covered in this section include sleeves and lock nuts, used for locating and
Contact us
Deep groove ball bearings - 16017 - S
d, 85, mm. D, 130, mm. B, 14, mm. d1, ≈, 100.3, mm. D1, ≈, 114.7, mm. r1,2, min. 0.6, mm. Abutment dimensions. da, min. 88.2, mm. Da, max. 126, mm. ra, max.
Contact us
Industrial bearing remanufacturing services - S
As a result, the service life of a bearing is often shorter than the calculated rating life.The alternative is to apply a controlled remanufacturing process before any
Contact us
Bearing data - S
The internal clearance of a single angular contact spherical plain bearing is only obtained after mounting and depends on the adjustment against a second
Contact us
Bearing Units - S
Bearing Units from SKF are assembled at the factory. These units come preadjusted, greased, sealed and ready to mount.
Contact us
Bearing accessories - S
Seals and bearing housings are covered in their own sections. The accessories covered in this section include sleeves and lock nuts, used for locating and
Contact us
Industrial bearing remanufacturing services - S
As a result, the service life of a bearing is often shorter than the calculated rating life.The alternative is to apply a controlled remanufacturing process before any
Contact us
Bearing Units - S
Bearing Units from SKF are assembled at the factory. These units come preadjusted, greased, sealed and ready to mount.
Contact us
Deep groove ball bearings - 16017 - S
d, 85, mm. D, 130, mm. B, 14, mm. d1, ≈, 100.3, mm. D1, ≈, 114.7, mm. r1,2, min. 0.6, mm. Abutment dimensions. da, min. 88.2, mm. Da, max. 126, mm. ra, max.
Contact us
Hot Bearing